Bituminous Joint Filler
Definition
SBS modified elastomeric bituminous joint filler.
Packing
18 kg./ Tin
Application Areas
Construction joints (Concrete, steel, wood, SBS modified waterproofing membranes)
Construction cracks (Concrete, steel, wood, SBS modified waterproofing membranes)
Application Method
The surface should be dry & clean of dust.
It is advisable to brush a layer of YALZER (SBS modified bituminous solution) on the surface.
Open the cap & heat the tin up to 180 °C.
Blend & pour it into the construction joint or crack.
Leave it to dry for minimum one hour.
Completely close the cap of the tin after use.
Can be removed by diesel fuel, toluene & trichloroethylene.
Stock
Can be stocked up to one year without opening the cap. (+5 to +30 °C)
